Contec VPC-2000, Руководство пользователя

Страница: 26 / 144

Chapter
３
Hardware setup
Table 3.1 Jumper setting
Name Function Factory Setting Reference page Remarks
JCOMS1 CMOS clear setting 1-2 Short P21 State usually
JMECLR1 JMECLR1 setting 1-2 Short P21 ※1
JROMCLR1 ROM clear setting 1-2 Short P22 State usually
JSETCOM3 COM3 port setting
(RS-232C) 2-4,3-5,810,9-11,14-16,
15-17,20-22,21-23 Short P22 ※1
JRS3 COM3 Terminator Open P23 ※1
JRS4 JRS4 setting 1-2 Short P22 ※1
※1 Use the factory default settings.
Table 3.2 Connector setting
Name Function Reference
page
Name Function Reference
page
FPAUD1 ※2 - EXT_SMBUS1 ※2 -
SPDIF1 ※2 - DIO_CN1 Degital I/O connector P26,72
USB910 USB9,10 connector P27,70 USB56 USB5,6 connector P27,70
XBT2 Battery connector - XBT3 +5V dual voltage
connector
-
CON3/4 Serial connector P29,66 SATA1-6 Serial ATA 1/2/3/4/5/6
connector
P.76
F_PANEL1 Front panel connector P28 SPI_CN1 ※2 -
EATXPWR1 ATX24pin power-supply
connector
P24 LPT1 Parallel port
connector
P.69
PWR_FAN1 ※2 - FDD1 Floppy disk connector P.75
CHASSIS1 ※2 - CPU_FAN1 CPU fan connector P.25
ATX12V1 ATX 12V power-supply
connector
P24 SYS_FAN1 System fan connector P.25
※2 Please do not use it.
※3 This connector is output through wires connected to the chassis. For details, see
pages 63 and 64.
20
User’s Manual