Contec VPC-2000, Руководство пользователя

Страница: 129 / 144

Chapter
８
Hardware RAID setup
Chapter８ Hardware RAID setup
This chapter describes hardware mirroring (RAID1) setup. We only support mirroring. We
do not support operation for other RAIDs (RAID0, RAID5, and RAID10). Be aware that
functions not supported are outside the scope of the warranty.
Hardware RAIDs are also hot-swappable.
Functional specification
For more on the specifications of RAID boards (hereinafter described as “mirror card”)
used for hardware RAIDs, refer to Chapter 2 “General”- “Specification”.
◆Locations and settings of switches and connectors
Once you have removed the case cover, the bracket for the riser card, and the mirror
card bracket, you will be able to see the connectors and jumpers as illustrated below.
switch
Table 8.1 Switch list
Factory default
setting
Referenc
e page
Name Function Remarks
S1 DIP switch setting 1～8 all OFF P120 State usually
S2/S3/S4/S5/S6 S2/S3/S4/S5/S6 switch setting Right P120 ※1
※1 Use the factory default settings.
Table 8.2 Connector list
Name Function Referenc
e page
Name Function Referenc
e page
CN1 Serial ATA connector (HDD1) - CN3 Serial ATA connector -
CN2 Serial ATA connector (HDD2) - CN4/CN5/CN6 ※2 -
※2 Do not use these.
User’s Manual
123