Contec VPC-2000, Руководство пользователя

Страница: 106 / 144

Chapter
６
Software utirity
◆Command option
You can modify operation through the following command options.
Table 6.2 Command option
Option Content of operation
Displays only a dialog for status checks without staying
resident in the system tray.
This dialog is identical to the one which can be displayed
through the system tray icon.
/status
If the utility does not stay resident in the system tray,
events are not output.
Changes the log output destination to the specified file.
When this option is specified, there is no output to the
event log.
/logtext={file pass}
Specify this if you are going to execute an event log service
in a situation where one cannot be started.
Changes the monitoring interval of the RAID status to the
number of seconds specified. (default setting: ten minutes
intervals)
/interval={Figure [sec]}
(Input range) 1 to 65535 seconds
Specifies the drive number (0 or higher) of the RAID board.
Unless specified, the board functions as drive number 0.
/drivenum={Figure}
You can check the drive number through Windows “Disk
Management”.
This enables the display of a balloon pop-up from system
tray icon when failure is detected.
/balloon
※1
/led This enables LED output when failure is detected.
This enables an automatic dialog popup when failure is
detected.
/dialog
※1 In this product, it doesn't use/led.
Execution example：（□:Space）
hwRaid.exe
□ /interval=10□/balloon □ /led □ /logtext=C:\Windows\Temp\raid.log
<Notes on /status option.>
If the “View Status” dialog appears with this option specified, the following
restrictions are imposed.
9 Task tray icon：Not displayed (A program does not stay resident.)
9
State notification functional：Invalidity
9
Log functional：Invalidity
9
Watch cycle：Fixation for 10sec
100
User’s Manual