Mounting Instructions
ProfiDAT
®
Data Transmission System
Programm 0514
MAL0514-0005b-EN
www.conductix.com
translated document
page 31 of 82
Transceiver
© Siemens AG 2017. All rights reserved
Fig. 16: Transceiver (sample photo)
The transceiver is a PROFINET/PROFIsafe-compatible communication device
based on the IEEE 802.11n standard. Communication with PROFINET-IO uses
a Layer 2 Tunneling Protocol (L2TP).
Installation can be on a wall, profile, or DIN rail.
The figure shows an example, because various transceiver types are available.
See the manufacturer’s documentation for a detailed description of the
transceiver (chapter 11.2 “Other applicable Documents”).
ProfiDAT
®
power feed cabinet
Fig. 17: Infeed switching cabinet
The power feed cabinet contains the component needed to mount a ProfiDAT
®
transceiver on the system. From the switching cabinet, the antenna connection
of the ProfiDAT
®
transceiver is connected to the infeed antenna on the
ProfiDAT
®
profile.
The ProfiDAT
®
transceiver is mounted on the DIN rail.
The infeed cabinet contains:
1)
Transceiver (access point)
2)
Thermostat/hygrostat
3)
DIN rail (35 x 15 mm)
4)
LED display/indicator light (optional)
5)
Heating element (mounted in the side wall)
6)
Connector terminals
7)
Line circuit breaker
8)
Power supply
Dimensions: 380 x 600 x 210 mm (width x height x depth)
Connectors:
Power supply (screw connection): 120–500 V AC / 50–60 Hz
Ethernet cable (screw connection):
N connector
Ground cable
