Mounting Instructions
ProfiDAT
®
Data Transmission System
Programm 0514
MAL0514-0005b-EN
www.conductix.com
translated document
page 60 of 82
6.5.1
Installing the ProfiDAT
®
Infeed Switching Cabinet
DANGER!
Danger of death due to incorrect installation!
The incorrect or improper installation of electrical components can lead to death or severe injury
by electrical shock. There is also a risk of injury from shock reactions, falling or being thrown
across the room as a result of an electrical shock.
Have the power supply in the infeed switching cabinet installed only by professional
electricians.
Fig. 58: Dimensions and holes for the power feed cabinet
Fig. 59: Transceiver Ethernet connection
Work steps:
Fasten the switching cabinet to the angle bracket with four screws.
Connecting the Ethernet plug at the transceiver:
1.
Insert the bare cable through the screw connection.
2.
Install the Ethernet plug (RJ45) on the cable.
3.
Tighten the screw connection.
4.
Insert the Ethernet connector (RJ45) into socket P1 or P2 (2) on the transceiver (see Fig. 59).
Observe the information and safety instructions in the manufacturer's documentation!
Connect the power supply (AC) for the power supply switching cabinet.
Connect the grounding cable of the power supply switching cabinet.
Connect the connecting cable (HF cable) (see chapter
