Mounting Instructions
ProfiDAT
®
Data Transmission System
Programm 0514
MAL0514-0005b-EN
www.conductix.com
translated document
page 76 of 82
Fig. 70: Pull out the carbon brushes
Pull out the carbon brushes (4) in an upward direction.
Pull out the antenna (5) in an upwards direction.
The cable on the antenna does not have to be disconnected.
Clean the head of the current collector (1) with a clean cloth.
Insert both carbon brushes (4) into the current-collecting head (1) from above.
Fig. 71: Inserting the antenna between the carbon brushes
Insert the antenna (5) between the 2 carbon brushes (4) from above.
5
4
1
2.
1.
5
1
4
