Mounting Instructions
ProfiDAT
®
Data Transmission System
Programm 0514
MAL0514-0005b-EN
www.conductix.com
translated document
page 25 of 82
3.3
Technical Data for the Transceiver
Designation
Value, unit
Ethernet
1 x 100 Mbit/s RJ45*
Supply voltage:
24 V DC*
Data rate
up to 100 Mbit/sec
Operating frequency
4.9–5.8 GHz**
Energy consumption
See the data sheet for the transceiver
Temperature range
See the data sheet for the transceiver
Dimensions (width x height x depth)
See the data sheet for the transceiver
Weight
See the data sheet for the transceiver
* Deviations may occur, see the manufacturer’s documentation (chapter 11.2 “Other applicable Documents”)
** Country-specific deviations may occur
Please note the information in the documentation of the transceiver, see chapter 11.2. “Other applicable documents”.
3.4
Technical Data for HF Cables
The following values must not be exceeded:
Designation
Value, unit
Temperature range
-25°C to +50°C
Min. bending radius
40 mm
Tension force
50 N
Recommended coupling torques:
N connector
SMA/R-SMA
4–6 Nm
79–113 Ncm
CAUTION!
The HF cables may not be squeezed (for instance through firm pulling at the cable binder).
Observe the bending radius of the HF cables.
Maintain the recommended coupling torque.
