Comtech EF Data LGAN, Инструкция по установке и эксплуатации

Страница: 86 / 118

LGaN
Revision 0
Serial Interface Operation 5–12 MN-LGAN
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII
numeric codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
Query
(Target to
Controller)
Attenuation ATT= 5 bytes Command or Query.
Set the RF attenuation level from 0 to 10dB in 0.25dB steps.
Example:
<1/ATT=10.00’cr’
>0001/ATT=’cr’’lf’
Default Value: 10.00
Default ATT Step: 0.25 dB
ATT=
ATT?
ATT*
ATT? ATT=xx.xx
(Same format
as command
arguments)
Auxiliary Mute AUX= 1 byte Command or Query.
Enable or disable the auxiliary mute hardware control.
Where:
1 = auxiliary mute enabled
0 = auxiliary mute disabled
Example:
<1/AUX=1’cr’
>0001/AUX=’cr’’lf’
Default Value: 0
AUX=
AUX?
AUX*
AUX?
Clear All Stored
Alarms
CAA= None Command only.
Instructs the unit to clear all Stored Alarms. This command takes no
arguments.
Example:
<1/CAA=’cr’
>0001/CAA=’cr’’lf’
CAA=
CAA*
N/A N/A
Clear All Stored
Events
CAE= None Command only.
Clear all Stored Events. This command takes no arguments.
Example:
<1/CAE=’cr’
>0001/CAE=’cr’’lf’
CAE=
CAE*
N/A N/A