Comtech EF Data LGAN, Инструкция по установке и эксплуатации

Страница: 40 / 118

LGaN
Revision 0
Firmware Update 3–4 MN-LGAN
3.3 Download and Extract the Firmware Update Files
Do these steps:
1. Go to the CEFD website at www.comtechefdata.com .
2. On the Home page, click the Software Updates tab to open the Software Downloads page.
3. On the Software Downloads page, click Download Flash and Software Update Files .
4. Select the Amplifiers hyperlink.
5. Select the LGaN product hyperlink.
6. Select the appropriate firmware archive ZIP file download hyperlink.
7. Once you select the ZIP hyperlink, the
File Download dialogue opens on your browser and
prompts an action. You may otherwise click [Cancel] to quit the file download process. Note the
following:
•
For ZIP files:
o
Click [Open] to open the archive file. Use the WinZip features to select the files
for extraction to your destination folder.
o
Click [Save] to download the ZIP file to your Windows Downloads folder. Once
the download is complete the dialogue prompts you to either [Open] the archive
file, or to open or view the Windows Downloads folder for further action.
8. If not already done with File Download > Open , you must extract, at a minimum, these files
(filenames are subject to change):
•
FW-00201193X_v111.zip – The Firmware Bulk Image file
•
FW-00201193X_v111_Release Notes.pdf – The Firmware Release Notes PDF file
•
The Webpost also contains *.mib files, used for SNMP.
WHERE: ‘X’ is the firmware revision letter, and ‘111’ is the
firmware version (e.g., FW Ver. 156 = “1.5.6”)
9. Confirm availability of the firmware files in a temporary folder. There are several ways you can
view the contents of the temporary folder on a Windows-based PC:
•
To use the Windows Desktop, see Section 3.2.2.1 .