Comtech EF Data LGAN, Инструкция по установке и эксплуатации

Страница: 102 / 118

LGaN
Revision 0
Serial Interface Operation 5–28 MN-LGAN
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII
numeric codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
Query
(Target to
Controller)
Retrieve
Maintenance
Status
(Cont)
P3V3T=003.3
PN5V8=-00.0
RF24I=000.0
PS24I=-01.5
LNB I=283.4
LNB V=000.0
SW24V=000.0
Retrieve
Next 5
Unread Stored
Events
N/A xx bytes Query only.
Unit returns the oldest 5 Stored Events which have not yet been
read over the remote control.
Reply format: {CR}Sub-body{CR}Sub-body{CR}Sub-body{CR} Sub-
body{CR}Sub-body,
Where:
Sub-body= ddmmyyhhmmssABCC:
Where:
A being the fault type
SYS= System
RF = RF Module
PS = PS Module
B being the fault/clear indicator.
FLT=Fault
OK=Clear
INF=Info
NA= Not Applicable
MSK= Masked
ALM= Alarm
CC is Fault or Alarm description:
Example:
<1/RNE?
>1/RNE=
06-22-15 11:57:50 PS FLT +13.5V PS
06-22-15 11:57:50 RF ALM Heat Sink Temp
06-22-15 11:57:50 RF FLT BUC LOCK DETECT
06-22-15 11:57:51 PS FLT +24V PS
RNE= RNE? RNE={CR}AB
CCddmmyyhh
mmss{CR}AB
CCddmmyyhh
mmss{CR}AB
CCddmmyyhh
mmss{CR}AB
CCddmmyyhh
mmss{CR}AB
CCddmmyyhh
m
mss
(See
description for
details of
arguments)