Comtech EF Data LGAN, Инструкция по установке и эксплуатации

Страница: 106 / 118

LGaN
Revision 0
Serial Interface Operation 5–32 MN-LGAN
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII
numeric codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
Query
(Target to
Controller)
Serial Number N/A 9 bytes Query only.
Used to Query the unit’s nine-digit serial number in the form of
SNO=xxxxxxxxx,
Where:
xxxxxxxxx is the unit’s nine-digit serial number.
Note: This command is functionally identical to RSN.
Example:
<1/SNO?’cr’
>0001/SNO=072282040’cr’’lf’
SNO= SNO? SNO=xxxxxxx
xx
(See
description for
details of
arguments)
Remote
Address
SPA= 4 bytes Command or Query.
Set Physical Address-between 0001 to 9999.
Resolution 0001
Example:
<1/SPA=0412’cr’
>0001/SPA=’cr’’lf’
Default Value: 0001
SPA= SPA? SPA=xxxx
(Same format
as command
arguments)
SNMP Read
Community
SRC= 16 bytes,
characters, no
spaces
Command or Query.
SNMP read community string. Empty string is not allowed
Example:
<1/SRC=public
SRC =
SRC!
SRC? SRC =x
(See
description of
arguments)
Set Statistics
Interval
SSI= 2 bytes Command or Query.
Sets the interval at which statistics are logged. Minimum resolution is
1 minute, maximum is 99 minutes.
Example:
<1/SSI=90’cr’
>0001/SSI=’cr’’lf’
Default Value: 60
SSI=
SSI?
SSI? SSI=xx
(Same format
as command
arguments)
SNMP Trap
Destination IP
Address 1
STA= 15 bytes,
Numerical
Command or Query.
Used to set the IP address of the first SNMP Trap destination IP
Address 1
Where traps will be sent in the form:
xxx.xxx.xxx.xxx is the IP addresss
Example:
<1/STA=010.006.030.001
When not configured, returns >0001/STA=0.0.0.0
STA =
STA!
STA? STA=xxx.xxx.x
xx.xxx
(See
description of
arguments)