Comrex BRIC-Link II, Руководство по эксплуатации продукта

Страница: 55 / 104

55
SWITCHBOARD STATUS
When switchboard is enabled on BRIC-Link II, addi onal status informa on appears on the right side of the
Connec ons Tab , including “Public IP” and “NAT Type” (as shown in Figure 41 ). The IP ports currently used by
the unit can also be shown by clicking the “Details” bu on. This informa on is o en useful for IT managers to
open or forward network ports.
Note: BRIC-Link II’s unique Switchboard ID/MAC address can be found here in the
“Details” pop-up window. This ID is required to add units to a Switchboard account, as described in the next sec on of
this manual.
FOLLOWING MULTIPLE CONTACT LISTS
Part of se ng up a Switchboard Account involves managing a feature called “Contact Lists” (see page 60 ). Adding
units to a Contact List allows codec users to fi nd and connect to any unit on that list, as long as that codec is set to
follow that Contact List. When a codec is set to follow more than one Contact List, the codec user will be able to fi nd
and connect to units on both Contact Lists. However, this changes the way codec users will interact with Switchbaord.
To understand the di
ff erence, fi rst see the BRIC-Link II’s Web User Interface as it appears when only one Contact List is
followed ( Figure 42 ).