Comrex BRIC-Link II, Руководство по эксплуатации продукта

Страница: 32 / 104

BUILDING A PROFILE
To build a new pro fi le, select “ Add New Pro fi le” ( 1 in Figure 25 ), and a new pro fi le will appear on the list named
“ New Pro fi le” . Select it to display a list of Pro fi le Se ngs, which appears to the right of the pro fi les list (
2 in Figure
25 ). Selec ng a se ng here will display the “Adjust Pro fi le Se ng” panel to the right of the se ngs list (
3 in Figure
25 ). A er choosing op ons or inpu ng data in this panel, the “Apply Changes” bu on must be clicked in order to
save any changes.
It may be useful to create new pro
fi les based on a copy of one of the already exis ng factory pro fi les, which can
be done by selec ng a pro fi le from the list and clicking “Copy Pro fi le”. Although this sec on discusses building new
pro fi les from scratch, a similar process can also be used to modify a newly copied pro fi le.
The fi rst Pro fi le Se ng that can be changed is the pro fi le’s Name . This name is used to iden fy the pro fi le when
selec ng from the list in the Connec ons Tab , and should be unique to avoid confusion.
Next is the Channel op on, which allows for selec ng between a standard Comrex IP connec on ( BRIC Normal )
or one of the other connec on modes o ff ered by BRIC-Link II. Note that when using the CrossLock reliability layer,
BRIC Normal mode is chosen here, as this is the protocol that runs with the CrossLock VPN.
Other Channel op ons include a modem-based connec on, IP Mul cast (a method to deliver audio to mul ple
loca ons), EBU3326/SIP for compa bility, and less o en used protocols like standard RTP, TCP, and HTTP. Di
ff erent
aspects of these channel types are described in later sec ons. The following sec on will mostly refer to op ons
available under the
BRIC Normal channel. Note: It is important to de fi ne the channel of a pro fi le before moving on
to other op ons, since the choices in the subsequent sec ons will vary based on this choice. Make sure to press
“Apply Changes” in order to con
fi rm each change made.
1
2
3