Comrex BRIC-Link II Скачать руководство пользователя страница 37

Страница: 37 / 104

SWITCHBOARD SERVER

Enable

- This op on enables the use of Switchboard to connect to remote units. (See

Making Switchboard

Connec ons on BRIC-Link II

page 53

for more informa on on using the Switchboard Traversal Server.)

Note:

BRIC-Link II requires the purchase of a Switchboard Traversal Server License for use with Switchboard.

Server Address

- Domain address of the Switchboard server.

Secure

- Enables secure connec ons to Switchboard Server. This is enabled by default.

Sta c Crosslock Peers

- When using CrossLock without Switchboard, remote peers can be managed in this list.

CROSSLOCK VPN

Enable

- This op on enables the CrossLock VPN added reliability layer to connect to remote units. (See

Making

CrossLock Connec ons on BRIC-Link II

page 47

for more informa on on using the CrossLock VPN.)

Retransmit Delay

- This sec on allows the selec on of addi onal delay for the retransmission of lost packets when

calcula ng auto-delay targets. The 2xRTT se ng is selected by default.

Redundant Transmission

- Enable to transmit data on all interfaces simultaneously to increase reliability at the cost

of available bandwidth. The default se ng is O

ﬀ

Encoder Thro le

- This op on will allow the system to reduce the bitrate of encoded media when network

condi ons deteriorate. Disabling this op on will prevent the system from lowering the quality of the encoded
media, but will also signi

cantly reduce the ability of the system to handle networks with variable performance.

This se ng is set to Yes by default.

HotSwap CC Indicator

- When enabled, this se ng will ac vate a selected contact closure when a CrossLock backup

interface is con

gured and has become ac vated due to failure of the primary interface(s). This is set to Disabled by

default.

HotSwap CC Unit

- This se ng allows users to select which unit to indicate HotSwap failover on. This is set to

Remote by default and addi onally includes a Local and Both selec on.

SYSTEM CLOCK

NTP Enabled

- Enables the use of NTP network me synchroniza on. This se ng is set to Yes by default.

NTP Server

- This allows users to set the address of the NTP server. This is set for 0.comrex.pool.ntp.org by default.

Timezone

- Users can set their Timezone in this se ng. This allows for inpu ng a User’s Timezone by Region,

Country, and Timezone.

ALTERNATE MODES

BRIC Normal Se ngs

• Accept Incoming Connec ons

- This determines if this BRIC-Link II is used for incoming normal IP

connec ons. If this func on is not enabled, BRIC-Link II will only support

outgoing

calls using BRIC Normal

Mode.

Содержание BRIC-Link II









































































































Результаты поиска

Содержание BRIC-Link II

Отзывы:

Похожие инструкции для BRIC-Link II

Бренды по названию

Популярные бренды

Comrex BRIC-Link II, Руководство по эксплуатации продукта

Результаты поиска

Содержание BRIC-Link II

Отзывы:

Похожие инструкции для BRIC-Link II

Бренды по названию

Популярные бренды