APPENDIX A IP COMPATIBILITY
BRIC-Link II is capable of encoding and decoding a choice of three di
ff
erent types of non-BRIC-Link II streams:
Standard RTP
,
Luci Live,
and
Zephyr Xstream
. The choice is exclusive—i.e., you must set BRIC-Link II speci
fi
cally
for the type of stream you wish to be compa ble with and you will remain incompa ble with the other two types
unless you change it. This se ng has no e
ff
ect on normal BRIC-Link II func ons, which con nue to operate as
before.
1. Luci
Live
- This PDA/PC-based so ware allows real- me streaming over IP links. As of version 1.2,
Luci Live
includes AAC and HE-AAC in addi on to the default MP2 algorithm. BRIC-Link II can communicate with
Luci Live
only in Luci’s AAC modes. Note: The free demo available from Luci does not incorporate the AAC
func ons; you must have a licensed and registered copy to use AAC.
To communicate with a
Luci Live
device:
- Ini al Setup
- This will de
fi
ne all Standard RTP connec ons to be Luci Compa ble.
On BRIC-Link II’s
System Se ngs Tab
, open the
Standard RTP
Se ngs
op on and choose
RTP
Compa bility Mode
. On the pull-down box, choose
Luci Live
.
- Incoming Connec ons
-
Luci Live
sends either an AAC or HE-AAC stream to the BRIC-Link II on UDP
port 5004. These streams will be automa cally decoded. By default, a return channel of AAC 56 kb/s
mono is returned to the
Luci Live
product. The return channel may be altered to any Luci-compa ble
mode in the
Systems Se ng
sec on.
- Outgoing Connec ons
- Build a pro
fi
le using the
Pro
fi
le Manager Tab
on the BRIC-Link II and select a
Channel Mode
of
Standard RTP
. Then choose a Luci-compa ble encoder for the outgoing call. The
Luci so ware will control what type of stream, if any, is returned to the BRIC-Link II.
2. Zephyr
Xstream
- Xstream Firmware version 3.2.0 and higher support an “RTP Push” func on that is
compa ble with BRIC-Link II in some modes. BRIC-Link II is not currently compa ble with the Xstream’s
HTTP and SIP streaming func ons.
There are several limita ons imposed by the Xstream when using the RTP Push func on:
• On the Xstream, only AAC and MP3 coding are available in this mode, and BRIC-Link II is only
compa ble with the AAC mode.
• The Xstream uses downsampling in modes below 96 kb/s, which is not supported by BRIC-Link II.
• In order for an Xstream to decode an BRIC-Link II
stream, the default decoder se ng must be
changed from <Auto> to <AAC> in the codec menu of the Xstream.
To communicate with a
Zephyr Xstream
:
- Ini al Setup
- This will de
fi
ne all Standard RTP connec ons to be Xstream Compa ble.
On BRIC-Link II’s
System Se ngs Tab
, open the
Standard RTP Se ngs
op on and choose
RTP
Compa bility Mode
. On the pull-down box, select
Zephyr Xstream
.
- Incoming Connec ons
-
Zephyr Xstream
sends an AAC stream to the BRIC-Link II on UDP port 9150.
These streams will be automa cally decoded. By default, a return channel of AAC 96kb/s mono is
returned to the Xstream. The return channel may be altered to any Xstream-compa ble mode in the
Systems Se ng
sec on.
Содержание BRIC-Link II
