Comrex BRIC-Link II Скачать руководство пользователя страница 38

Страница: 38 / 104

EBU3266/SIP Se ngs

• Accept Incoming Connec ons

- This determines whether incoming calls are accepted in EBU3326/SIP

format (used for compa bility with other manufacturers who follow this protocol).

• Incoming

Connec on Pro

- This allows users to select whether SIP calls will take place using a speci

encoding algorithm. Note: If this op on is chosen, only calls using the selected algorithm are allowed.
Default is “None”.

• Use SIP Proxy

- This op on determines whether the SIP func on is “registered” to a SIP cloud server. If this

se ng is enabled, then the address, user name, and password for the proxy must be added in the relevant

elds.

• SIP Proxy Address

- IP address or URL of the SIP proxy used.

• SIP

Username

- Username for logging into registered SIP server; provided by the SIP service provider.

• SIP

Password

- Password for logging into registered SIP server; provided by the SIP service provider.

ADVANCED SYSTEM SETTINGS

When the

Show Advanced Se ngs

op on is enabled, addi onal op ons and categories are displayed.

SECURITY

Remote Control

- This enables remote control and

rmware update func onality. This op on may be changed in

the System console only and is View Only in the Web Interface.

Remote Diagnos cs

- When ac vated, this op on allows for remote diagnos cs capability. The default se ng is O

ﬀ

Web Server Port

- This controls the port that the

UI web server uses when remote control is enabled. The default

se ng is TCP 80.

AUXILIARY SERIAL

Baud Rate

- Allows for controlling the Baud Rate of the serial port. Default is set to 9600.

Data Bits

- Allows for the con

gura on of number of data bits. Default is set to 8.

Stop Bits

- Con

gures the number of stop bits. Default is set to 1.

Flow Control

- Allows for selec on of the

ow control method. Default is set to None with op ons for HW (RTS/

CTS) and SW (XON/XOFF). This has no func onal e

ﬀ

ect on BRIC-Link II.

Parity

- Users can select parity protec on with this se ng. Default is set to None with the addi onal op ons for

Odd or Even.

CROSSLOCK VPN

UDP Port - Sets the UDP port used for Crosslock VPN Connec ons. Default is set to UDP 9001.

Permissive - Allows users to accept Crosslock connec ons from any unit. This is set to No by default.

Содержание BRIC-Link II









































































































Результаты поиска

Содержание BRIC-Link II

Отзывы:

Похожие инструкции для BRIC-Link II

Бренды по названию

Популярные бренды

Comrex BRIC-Link II, Руководство по эксплуатации продукта

Результаты поиска

Содержание BRIC-Link II

Отзывы:

Похожие инструкции для BRIC-Link II

Бренды по названию

Популярные бренды