42
Apply phantom power to mic input
- When selected, this function applies a 12V phantom power signal to the
Mono In
connector when the
Mic/Line
switch is in the
Mic
position. This is for use with electret or condenser
microphones. This setting should be in the off position for use with normal dynamic microphones.
Add mobile phone to return feed
- If this option is selected, the
Mobile In/Out
connector input becomes active.
It allows attachment of a mobile phone’s hands-free port to the unit. The function of this input is to allow remote
audio (sourced from the output of a mobile phone) to be added to the headphone output of the ACCESS. This audio
is not applied to the
Line Out
signal.
Add local audio to line out/Add return audio to line out
- Here you can select which audio feeds are being sent to
the fixed-level
Line Out
jack; Audio being generated locally (
Local
), Audio being sent from the far-end connection
(
Return
), or a mixture of both.
mIXeR AUdIO
The following settings apply to the optional ACCESS clip-on mixer:
Apply phantom power to mic inputs
- When selected, this function applies a 12V phantom power signal to the
mixer Input XLRs when
Mic/Line
switch is in the
Mic
position. This is for use with electret or condenser
microphones. This setting should be in the off position for use with normal dynamic microphones. Phantom power
cannot be individually selected to each mixer input; it must be on or off for all channels.
Add mobile phone to return feed
- If this option is selected, the
Mobile In/Out
connector input becomes active.
It allows attachment of a mobile phone’s hands-free port to the unit. The function of this input is to allow remote
audio (sourced from the output of a mobile phone) to be added to the headphone output of the ACCESS.
Содержание ACCESS 2USB
Страница 1: ...Product Manual ...
