computar acom6, Инструкция по установке и эксплуатации

Страница: 48 / 56

48
ACom6
Operation
Assembly
After you have carried out and checked all connections and configurations, you may now
proceed with the re-assembly of the casing.
• Check the lines for firm and stable hold.
• Remove the cable at the serial interface and (if applicable) the cable of the surveillance
screen.
• Replace the lid. Both flaps must snap in with a discernible clicking sound.
LEDs
1 Power
lights up if the device is connected to the power supply.
2 Detect
lights up if the video sensor detects a movement in the video image (only if this func-
tion has been activated).
3 B2
lights up if a connection exists on the ISDN-channel B2
flashes if service switch has been switched to position Service.
4 B1
lights up if a connection exists on the ISDN-channel B1
5 HDD
lights up if data are being recorded on the hard disc.
Operation