12
ACom6
Assembly
The ACom is suitable both for operation as a desktop and for being mounted on the wall.
z
Attention!
The device is intended for indoor use. Do not expose it to either extreme tem-
peratures or extreme humidity at any time and choose its setup site accord-
ingly. The ambient temperature must fall within the range from 5 to 40 °C at all
times, the relative humidity of the air must not exceed 80 %.
❚
Do not set up the device in the immediate vicinity of radiators or other heat sources.
Avoid sites which are exposed to direct sunlight.
❚
Create sufficient space for lines and cables.
❚
Ensure sufficient ventilation of the device.
❚
For cable connections, use only cables which have been part of the delivery or are
otherwise suitable and which help to suppress electric interference.
❚
When laying out the lines and cables, make sure that they cannot be easily damaged
and ease wherever possible tensile loads and stresses.
Wall-Mounting
At the back of the ACom you will find four fixing holes that you can use for mounting the
ACom on the wall.
☞
Important
Mount the ACom in immediate vicinity to your NTBA for it to be the first device
to be connected to the S
0
-Bus.
• Push against the flaps by the side and lift the lid to open the casing.
• Screw the ACom to the wall by using the four fixing holes.
Assembly
Содержание acom6
Страница 10: ...10 ACom6 Connections Product Description...
