computar acom6, Инструкция по установке и эксплуатации

Страница: 44 / 56

44
ACom6
Input Actions
You can define the switching of the video inputs for the ACom. You can set which alarm
input activates which video input. On the basis of this configuration, you can switch both
local and remote cameras to a keyboard which is connected with the ACom without us-
ing a computer programme.
As long as no connection has been established via the phone network, the local video
inputs are being activated; when a connection exists, the video inputs of the remote
ACom are used.
You can rule separately for every input whether a local or a remote video source is to be
activated. The setting - - - - - - - - does not cause any change.
Hold Function
When several alarm sensors (such as movement detectors) are connected to the ACom,
it may happen that different sensors trigger an alarm in rapid succession and thereby
switch on the cameras assigned to them. Such multiple switching actions can be avoided
by activating the holding function. If you have activated the holding function, only the first
alarm will cause the camera image to be offered. Any further alarm will not have a bearing
on the camera picture as shown.
Configuration with CMCtrl