26
ACom6
• Enter a call number in the upper list panel in order to establish a connection with a
remote ACom or click one of the boxes
Test
.
• Click, if necessary, either of the control boxes
2B
or
Modem
for selecting the respec-
tive option.
• Click
Establishing a Connection
to dial the number you have chosen.
• Pay attention to the status messages in the lower list panel and the other status
panels.
• Click on the field
Outputs
to activate the available relay outputs of the ACom.
• Click on the field
Terminating a Connection
to terminate the existing connection.
ACom-Settings
Immediately after the start, CMCtrl begins its search for devices capable of configuration.
If a local ACom has been found, the field
Local Unit
will light up in yellow. If a connection
has been established with a remote device, the field
Remote Unit
will light up in red.
When one of those two fields lights up in colour, you may proceed with the configuration
of the device in question. When the field remains grey, this indicates that no connection
has been established. In this case, check the parameters in the menu
Interface
or estab-
lish the connection to a remote ACom.
• Click on either
Local Unit
or
Remote Unit
. The dialogue window
Settings
will be
opened.
• Go through the individual tabs.
• When you have completed your selections, click on the X in the title bar of the window.
The dialogue window will be closed.
Configuration with CMCtrl
Содержание acom6
Страница 10: ...10 ACom6 Connections Product Description...
