CompAir 5280D.1.IAC, Руководство оператора

Страница: 110 / 134

App 408 Customer PET controller installation guide & user's manual
Page 14
App 408C 98155.1015
2.2.9.1 Test digital inputs
Function:- By changing the status of the input, the input can be tested.
Input No. Parameter Default Min Max
1 Emergency stop. Closed Open Closed
2 Motor current. Closed Open Closed
3 Water circulation. Open Open Closed
4 Fault A Open Open Closed
5 Fault B Open Open Closed
6 Fault C Open Open Closed
7 Remote stop/start Open Open Closed
8 Motor temperature Closed Open Closed
9 Emergency stop B Closed Open Closed
10 Fault D ( time delayed ) Open Open Closed
11 Fault E ( time delayed ) Open Open Closed
12 Fault F ( time delayed ) Open Open Closed
13 Remote load/ unload Open Open Closed
14 Water pump overload Open Open Closed
15 Air filter dP Open Open Closed
16 Fan motor overload Open Open Closed
Table 11
2.2.9.2 Test digital outputs
Warning: the relays are being powered for testing!
Digital
output No.
Parameter Function Min Max
1 Main contactor control relay Relay 1 is powered Off On
2 Star contactor control relay Relay 2 is powered Off On
3 Delta contactor control relay . Relay 3 is powered Off On
4 ½ load solenoid valve Relay 4 is powered Off On
5 Full load solenoid valve Relay 5 is powered. Off On
6 Compressor running Relay 6 is powered Off On
7 Not used Open collector output 2 is activated. Off On
8 Not used Open collector -PWM- output 1 is activated. Off On
9 Drain solenoid control relay Relay 9 is powered. Off On
10 Water pump control relay. Relay 10 is powered Off On
11 Fan motor control relay . Relay 11 is powered Off On
12 Group fault relay . Relay 12 is powered Off On
13 Compressor available relay. Relay 13 is powered Off On
14 Not used Open collector output 1 is activated Off On
15 Not used Open collector output 2 is activated. Off On
16 Not used Open collector -PWM- output 1 is activated. Off On
Table 12