CompAir 5280D.1.IAC, Руководство оператора

Страница: 100 / 134

App 408 Customer PET controller installation guide & user's manual
Page 4
App 408C 98155.1015
1.2 Displays
The controller is equipped with 3-bottom view - side lighted displays. Each display is dedicated for a
specific purpose:
The following messages can be displayed:
Display type Message Meaning
3 digit seven segment
(left display) e.g. 40.2
- - -
•
Current system pressure is constantly
being displayed.
•
Indicating a pressure sensor error.
(See table 4on page 8)
3 digit seven segment
(right display) e.g. 25
- - -
•
Current air delivered temperature is
being constantly displayed.
•
Indicating a temperature sensor error
(See Table 4 on page 8)
Alpha numeric 2 lines 16 character e.g. emergency stop.
e.g. standby.
e.g. service. Error indications.
Status indications.
Service timers.
Table 1
1.3 Push buttons
The controller is equipped with 8 tactile push buttons and each push button has its own specific function.
Button Function
Arrow up Select previous menu item.
Arrow down Select next menu item.
Minus Exit current menu (back to previous).
Plus Entering the selected menu.
Enter Modifying / confirming variable settings.
Green rectangular Starting the compressor locally.
Red rectangular Stopping the compressor locally. (The compressor will run on for the
unloaded run time before it actually stops)
Reset Return to the basic menu or
Reset the controller whenever an alarm/warning occurred.
Table 2
1.4 LED’s
The controller is equipped with 4 LEDS and each LED has its own specific function.
LED Meaning
BAR The pressure unit is set at BAR (see Table 6 on page 9).
PSI The pressure unit is set at PSI (See Table 6 on page 9)
°
C
The temperature unit is set at Celsius (see Table 6 on page 9
°
F
The temperature unit is set at Fahrenheit (see Table 6 on page 9).
Table 3