manualshive.com logo in svg

CompAir 5280D.1.IAC, Руководство оператора

Поделиться
Скачать
CompAir 5280D.1.IAC Скачать руководство пользователя страница 11

CompAir UK Ltd.

 

5280D Compressor Publication 98407.1440

 

Page 8 

1440.doc

 

 
 
 
 
 
 

SAFETY 

 

• 

WARRANTY

 

The Conditions of the CompAir UK Ltd Warranty are set out in the Standard Conditions of Sale. 

 

• 

MAINTENANCE

 

To ensure continued trouble free operation of the compressor it is important that periodic maintenance 
and servicing are carried out in accordance with the information given in the "Maintenance" section of 
this Manual. If any replacement or repair is needed use genuine CompAir UK Ltd parts. 

 

∗ 

WARNING 

The use of replacement parts or lubricating oils not supplied or approved by  
CompAir UK Ltd. may lead to failures in service which would not be covered by warranty. 

 

Any unauthorised modifications or failure to maintain this equipment in accordance with maintenance 
instructions may make it unsafe. 

The use of replacement parts not supplied by CompAir UK Ltd may 

create hazardous conditions over which CompAir UK Ltd has no control.

 

 
 

Such hazardous conditions may lead to accidents that can be life threatening, cause substantial bodily injury 
or result in damage to the equipment. 

CompAir UK Ltd can bear no responsibility for equipment for 

which unapproved replacement parts are included.

 

 
 

 
SPECIAL NOTE:  
 
THE FOLLOWING HEALTH AND SAFETY PRECAUTIONS MUST BE READ IN 
CONJUNCTION WITH ANY OTHER MANUFACTURERS EQUIPMENT SUPPLIED. 
 

 

Содержание 5280D.1.IAC







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды