EQUIPMENT MANUAL FOR RD-9120
RD-9120 QE
Copyright - refer to title page
Page 34
ENU Status : 1-0-0
Enter the correct phone number and click ‘Dial’, wait until the system indicates ‘Online Ok’.
Note: For remote connection, please ensure that SMS center number is set already before remote
connection. Otherwise, a window will pop up indicating to set the SMS center number.
Figure 14
:
OMT main window - online ok
In the event of connection failure, a connection prompt will appear on the screen, proceed to verify the
following and re-try the connection:
z
Check the power connection
z
Check serial port selection
z
Check speed setting for the port
z
Check whether the mains voltage is normal, and whether the equipment is switched on.
z
Check whether the ‘Device ID’ is correct (when connection to OMC).
Note: If the items in the OMT window are displayed in gray, it means the items can not be set or
monitored.
