EQUIPMENT MANUAL FOR RD-9120
RD-9120 QE
Copyright - refer to title page
Page 30
ENU Status : 1-0-0
4.3 OMT
The equipment can be monitored and controlled by one or two means.
z
OMT software running on a local PC with serial connection the equipment
z
OMC software with remote connection to the equipment over wire/wireless telecommunication
network.
Note: if the items in the OMT window are displayed in gray, it means the items can not be set or
monitored.
OMT software is based on Windows operation system, and is designed for monitoring and maintaining of
Comba repeaters and boosters.
For RD-9120 repeater, the OMT software can accomplish the following functions:
z
To configure and adjust the repeater’s operating parameters
z
To display the repeater’s internal operation status
z
To display the input field level and output power
z
To download MCU firmware
4.4 NON-VOLATILE MEMORY
A non-volatile storage device on the MCU holds the configuration of the equipment, the following
information are preserved in the event of power-loss:
Repeater configuration
Site Address
SMS center number
Alarm dial-up number
OMC inquiry number
Remote communication mode
Operating parameters
Master ATT
Assistant ATT
PW on/off
Oscillation on/off
Output power
Gain
Channel field
Alarm thresholds
