InteliLite
NT
– AMF20/25, SW version 1.2, ©ComAp – March 2008
55
IL-NT-AMF-Reference Guide1.2.pdf
Type Channel 1,2
[ DISABLED, SMS, E-MAIL ]
TelNo/Addr Ch1, 2
Enter either a valid GSM phone number or e-mail address to this setpoint, where the alarm messages
shall be sent.
Hint:
For GSM numbers use either national format (i.e. like number you will dial if you want to make a local
call) or full international format with "+" character followed by international prefix in the begin.
This setpoint can be modified from PC only!
NumberRings AA
[ - ]
Number of rings prior to open modem connection.
Step:
1
Range:
1 – 30
Hint:
NumberRings AA
change is not activated immediately. It is activated after the controller is switched on
or when modem is connected to the controller.
ActCallAttempt
[ 1 to 250 ]
When active call is activated, controller tries five times to open the connection when
ActCallAttempt
= 1 (e.g. when the phone line is engaged).
There are ten attempts when ActCallAttempt = 2, etc.
Step:
1
Range:
1 to 250
Hint:
There are 5 attempts for any active call. Timeout for connection is 90 sec and after 120 sec controller
starts the next attempt. During the time the IL-NT is trying to send an active call type, incoming calls
are blocked.
