InteliLite
NT
– AMF20/25, SW version 1.2, ©ComAp – March 2008
29
IL-NT-AMF-Reference Guide1.2.pdf
Inputs and Outputs
Hint:
Any Binary input or output can be configured to any IL-NT controller terminal or changed to different
function by LiteEdit software. There is fix 1 sec delay when any binary input is configured as
protection.
Binary inputs IL-NT - default
BI1 GCB Feedback
BI2 MCB Feedback
BI3 Emergency Stop
BI4 Access Lock
BI5 Remote OFF
BI6 Remote TEST
BI7 Sd Override
Binary inputs – list
Not Used
Binary input has no function. Use this configuration when Binary input is not connected.
Alarm
If the input is closed (or opened) selected alarm is activated.
Binary Alarm configuration items
Name
14 characters ASCII string
NC Normally
closed
Contact type
NO Normally
opened
Warning
Alarm type
Shut down
All the time
Valid if checkbox “Engine running
only” is not checked
Alarm active
Engine running only
Valid if checkbox “Engine running
only” is checked
GCB Feedback
Use this input for indication, whether the generator circuit breaker is open or closed.
If the feedback is not used, connect this input to the output GCB CLOSE/OPEN
MCB Feedback
This input indicates whether MCB is closed or opened.
Emergency Stop
If the input is opened, shut down is immediately activated. Input is inverted (normally closed) in default
configuration.
