Colin BP-S510, Руководство по эксплуатации

Страница: 110 / 137

104
Nurse Call Interface
WARNING: The nurse call feature should not be used as the primary source of
alarm notification. The audible alarms of the monitor, used in conjunction with
clinical signs and symptoms, are the primary sources for notifying medical
personnel that an alarm condition exists.
CAUTION: The nurse call feature is not functional whenever the monitor alarms are
silenced.
CAUTION: The nurse call function needs to be tested after it has been set up in
your facility. The nurse call feature should be tested whenever setting up the BP-
S510 in a location that uses nurse call. One way to test the nurse call function is to
create an alarm condition (for example, sensor disconnect) and verify that your
facility’s nurse call system is activated.
The nurse call feature of the monitor is operational when the monitor is powered by AC
power or battery power. The nurse call feature of the monitor works in conjunction with the
nurse call system of your institution when the monitor sounds an audible alarm.
The monitor provides the nurse call interface of relay closure type. The interface functions
when the monitor is operating either on AC power or battery power.
The remote location is signaled anytime there is an audible alarm. If the audible alarm has
been turned off or silenced, the nurse call function is also turned off.
Nurse Call Relays Normally Open/Closed
Pins 7 and 15 provide a relay that closes when an alarm is sounding on the monitor. Pins
8 and 15 provide a relay that opens when an alarm is sounding. Pin 15 is a common lead
for both relays.