1
2
OK!
STOP!
quickdraw
karabiner
NO!
www.climbingtechnology.com
- 9 -
DRAWINGS
| DISEGNI | DESSINS | DRAWINGS | DIBUJOS
WEB_IST12-2D651CT rev.3 07-13
13 | BELAYING OF 1 OR 2 SECONDS IN A SELF-LOCKING WAY
This mode allows the belaying of one or two seconds.
After the setup and before the belaying you must test the system:
pull on the rope on the climber’s side to verify that the self-locking function stops the rope on the climber’s side.
OK!
13.1
SETUP
13.2
SETUP
13.3
TESTING
13.4
BELAYING 1 SECOND
NO!
Insert the rope in slots B
ref. to symbols 9-10 (1).
Insert a wide-base HMS
karabiner in the hole G
with the rope inside (2).
Connect the Concept ka-
rabiner at the center of the
belay station and connect
it in the hole I, so that the
ropes remain below it.
Pull on the rope on the
climber’s side to verify that
the self-locking function
stops the rope on the
climber’s side.
Use both hands to take up
slack at the climber end
through the device.
Hold
the free end of the rope
taut in both hands.
13 | BELAYING OF 1 OR 2 SECONDS IN A SELF-LOCKING WAY
This mode allows the belaying of one or two seconds.
13.5
BELAYING 2 SECONDS
13.6
WARNING!
13.7
GRADUALLY RELEASING
When using half or twin
ropes,
always hold both
free ends of the ropes
firmly in your hands and
taut!
Always hold both free
ends of the ropes firmly
in your hands and taut!
Insert a quickdraw karabiner
in the hole L, hold both free
ends of the rope firmly in your
hand and push your palm up.
