15
13. Clean the door assembly.
a. Remove the door gasket assembly (see Figure 6-1).
b. Note the keyhole slots on the door and the retaining pins on
the gasket assembly. Grasp the gasket assembly at the
sides and lift up towards you to remove the assembly.
c. Clean all surfaces of the gasket assembly, as well as the
inside of the door, by wiping with a damp cloth.
d. Rotate the liner assembly 180
°
and replace the gasket
assembly by sliding the retaining pins into the keyhole slots.
Either long edge of the gasket assembly can be positioned
at the top. Periodic rotating of the door assembly will help
increase the door gasket life.
14. Replace the cleaned KleanShield
, slide racks and fan
guard. (See Chapter 3.)
15. Wipe the exterior with a damp cloth only.
16. NEVER HOSE DOWN THE STEAMER. Electrical components inside the unit will not function
correctly if wet or damp and may cause a shock hazard.
17. After cleaning, leave the steamer door open until the next steamer operation. This prevents
compartment odor buildup and helps increase gasket life.
Figure 6-1
Door Gasket Assembly
