Hydrogen generator
HyGen
35
• connect the drain line with the supplied polyamide pipe of outside diameter 4
mm;
• make sure that the drain line discharges into a container.
m
the drain line must never be obstructed, subjected to pressure or to
the risk of freezing
7.2.8.
Step 8: connect the water leak collection pipe
Should water leak from the tanks, the generator is equipped with a system for
collecting and expelling it.
To allow this, perform the following operations:
• Locate the coupling “O” at the rear of the generator;
• connect the water leak collection line with the fitting "P" and the polyamide pipe
of outside diameter 4 mm supplied;
N
O
P
