Citrix NetScaler EE, Руководство по установке и настройке

Страница: 899 / 1026

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.899 https://docs.citrix.com
Customizing the Ethernet ports
Dec 26, 2012
A typical appliance has four Ethernet ports: two accelerated bridged ports, called
accelerated pair A
(apA.1 and apA.2), with
a bypass (fail-to-wire) relay, and two unaccelerated motherboard ports, called Primary and Aux1. The bridged ports provide
acceleration, while the motherboard ports are sometimes used for secondary purposes. Most installations use only the
bridged ports.
Some SD-WAN units have only the motherboard ports. In this case, the two motherboard ports are bridged.
The appliance’s user interface can be accessed by a VLAN or non-VLAN network. You can assign a VLAN to any of the
appliance’s bridged ports or motherboard ports for management purposes.
Figure 1. Ethernet Ports
The ports are named as follows:
T able 1. Et hernet Port Names T able 1. Et hernet Port Names
Motherboard port 1 Primary (or apA.1 if no bypass card is present)
Motherboard port 2 Auxiliary1 or Aux1 (or apA.2 if no bypass card is present)
Bridge #1 Accelerated Pair A (apA, with ports apA.1 and apA.2)
Bridge #2 Accelerated Pair B (apB, with ports apB.1 and apB.2)