Citrix NetScaler EE, Руководство по установке и настройке

Страница: 332 / 1026

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.332 https://docs.citrix.com
SD-WAN Appliances at the DC and Branch sites should be running latest release version.
End-to-End IP connectivity should be configured and working fine.
OSPF is enabled on all the sites.
T o conf igure OSPF T ype 1: T o conf igure OSPF T ype 1:
1. Configure Virt ual Int erf aces Virt ual Int erf aces and WAN links WAN links on both the DC and Branch sites so that you can create Virtual Path
between them.
2. Under Connect ions Connect ions->[MCN MCN]->Rout e Learning Rout e Learning->OSPF OSPF ->Basic Set t ings Basic Set t ings, select Export OSPF Rout e T ype Export OSPF Rout e T ype to be
T ype 1 Int ra Area T ype 1 Int ra Area.
3. Save the configuration, stage and activate the configuration.
You should be able to see following route types under
Expo rt OS PF Ro ute T ype Expo rt OS PF Ro ute T ype
Type 5 AS External
Type 1 Intra Area
You should be able to configure Type 5 AS Ext ernal Type 5 AS Ext ernal route.
After activation of the changed configuration, you should see the Route Type changes under Configurat ion Configurat ion->Virt ual Virt ual
WAN- WAN->View Configurat ion View Configurat ion->Dynamic Rout ing Dynamic Rout ing.
As shown in the illustration above, DC MCN is deployed in one-arm topology. When DC site is up, one-arm router forwards
all traffic from local LAN to other sites, such as the Branch's local LAN whose destination IP address is within same subnet
to the SD-WAN first, then SD-WAN appliance wraps all packets and sends it to the router with all the packets destination
IP address in the Branch Virtual IP address. The router then forwards those packets to WAN.
When the DC site is down, router forwards all traffic from local LAN to other sites (branch site's local LAN, destination IP is
within subnet) to WAN directly, and not to the SD-WAN appliance.
OSPF Type5 to Type1 Deployment in MPLS Network
The following deployment mode is provided to avoid loop formation in an MPLS network configured using SD-WAN
appliances. The illustration below describes the standard MPLS network implementation.