Citrix NetScaler EE, Руководство по установке и настройке

Страница: 284 / 1026

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.284 https://docs.citrix.com
6. Click the add (+) icon next to the new rule.
7. Click Init ialize Propert ies Using Prot ocol Init ialize Propert ies Using Prot ocol to initialize the rule properties by applying the rule defaults and
recommended settings for the protocol. This will populate the default rule settings. You can also customize the settings
manually, as shown in the following steps.
8. Click the WAN General WAN General tile to configure the following properties.
* Transmit Mode Transmit Mode: Select one of the following transmit modes.
- Load Balance Pat h Load Balance Pat h: Traffic for the flow will be balanced across multiple paths for the service. Traffic will be
sent through the best path until that path is completely used. Leftover packets will be sent through the next best path.
- Persist ent Pat h Persist ent Pat h: Traffic for the flow will remain on the same path until the path is no longer available.
- Duplicat e Pat h Duplicat e Pat h: Traffic for the flow is duplicated across multiple paths, increasing reliability.
- Override Service Override Service: Traffic for the flow will override to a different service. In the Override Service field, select the
service type to which the service will override. For example, a virtual path service could override to an intranet, internet, or
pass-through service.
* Ret ransmit Lost Packet s Ret ransmit Lost Packet s: Send traffic that matches this rule to the remote appliance over a reliable service and
retransmit lost packets.
* Enable TCP Terminat ion Enable TCP Terminat ion: Enable TCP termination of traffic for this flow. This reduces the round-trip time for
acknowledgement packets and therefore improves throughput.
* Enable IP, TCP and UDP Enable IP, TCP and UDP : Compress headers in IP, TCP and UDP packets.
* Enable GRE Enable GRE: Compress headers in GRE packets.
* Enable Packet Aggregat ion Enable Packet Aggregat ion: Aggregate small packets into larger packets.
* Track Perf ormance Track Perf ormance: Records performance attributes of this rule in a session data base (for example, loss, jitter,
latency and bandwidth).
9. Click the LAN t o WAN LAN t o WAN tile, to configure LAN to WAN behavior for this rule.
* Class Class: Select a class with which to associate this rule.