Citrix NetScaler EE, Руководство по установке и настройке

Страница: 697 / 1026

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.697 https://docs.citrix.com
happened long before the screen was displayed, and the Message indicates that the incident was Non-Critical, so
replacing the power supply is likely not called for.)
Several ports are marked as Down, which is only an error if a cable is supposed to be present. Most appliances have
several unused ports.
Fail To Wire lists FTW Disabled for all ports. This means that the network bypassing feature is not enabled on this
appliance. Examination of the FTW Events showed that there were no actual events, indicating that the feature is
probably disabled.
For each warning or error, additional details are available through the Details links or Show Events buttons.
Logging In T o Logging In T o Dif f erent Inst ances via SSH Dif f erent Inst ances via SSH
You can log into some of the virtual machines from the management port (port 0/1) using an ssh utility (such as PuTTY on
Windows), logging in either as root or nsroot and using the administrative password. This will give you a shell prompt.
The most common use for logging on via SSH is to restore the IP address of an instance, typically the management service,
that has become unreachable due to misconfigured network parameters. Otherwise, SSH is not recommended, as
configuration changes can render the appliance unstable or unusable.
If neither of the two instances below are accessible over the network, you can log into the XenServer instance using the
RS-232 port, which will give you a shell prompt.
Inst ance Inst ance Login Login Password Password Act ual username Act ual username
Management Service nsroot Admin password root
Management Service root Admin password root
XenServer nsroot Admin password nsroot
XenServer root Admin password root
Once logged into one of these virtual machines, you can use SSH from the shell prompt to reach the NetScaler instance or
the accelerator at the appropriate 169.254.x.x address.
The usual UNIX/Linux commands are available, including the vi text editor.
Monit oring Monit oring Individual Accelerat or Inst ances Individual Accelerat or Inst ances
Logging into the accelerator GUI IP allows you to manage all the accelerator instances as a unit. Changes are automatically
propagated to all the accelerator instances.
On rare occasions, you may wish to troubleshoot individual accelerator instances. To do this, use the following URL’s:
Accelerat or Inst ance Accelerat or Inst ance URL URL
1 https://<accelerator_ip>:4001
2 https://<accelerator_ip>:4002
…