Citrix NetScaler EE, Руководство по установке и настройке

Страница: 770 / 1026

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.770 https://docs.citrix.com
Rack Mounting the Appliance
Sep 10, 2017
Most appliances can be installed in standard server racks that conform to EIA-310-D specification. The appliances ship with
a set of rails, which you must install before you mount the appliance. The only tools that you need for installing an
appliance are a Phillips screwdriver and a flathead screwdriver.
Citrix SD-WAN 4000/5000 appliance requires two rack units.
Each appliance ships with a mounting rail kit that contains two rail assemblies, one for the left side and the other for the
right side of the appliance, and screws to attach the rails. An assembly consists of an inner rail and a rack rail. The supplied
rail kit is 28 inches long (38 inches extended). Contact your Citrix sales representative to order a 23-inch (33 inches
extended) rail kit.
To mount the appliance, you must first install the rails and then install the appliance in the rack.
Perform the following tasks to mount the appliance:
Remove the inner rails from the rail assembly.
Attach the inner rails to the appliance.
Install the rack rails on the rack.
Install the appliance in the rack.
Note
The same rail kit is used for both square-hole and round-hole racks. See figure 4 for specific instructions for threaded, round-hole
racks.
Warning
If you are installing the appliance as the only unit in the rack, mount it at the bottom. If the rack contains other units, make sure that
the heaviest unit is at the bottom. If the rack has stabilizing devices available, install them before mounting the appliance.
To remove the inner rails from the rail assembly
1. Place the rail assembly on a flat surface.
2. Slide out the inner rail toward the front of the assembly.
3. Depress the latch until the inner rail comes all the way out of the rail assembly.
4. Repeat steps 1 through 3 to remove the second inner rail.
To attach the inner rails to the appliance
1. Position the right inner rail behind the handle on the right side of the appliance.
2. Align the holes on the rail with the corresponding holes on the side of the appliance.
3. Attach the rail to the appliance with the provided screws: 5 per side, as shown in the following figure.
4. Repeat steps 1 through 3 to install the left inner rail on the other side of the appliance.
Figure 1. Attaching inner rails