Citrix NetScaler EE, Руководство по установке и настройке

Страница: 294 / 1026

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.294 https://docs.citrix.com
Routes are auto-created based on the above configuration. The DC LAN sample topology shown above has an additional
LAN subnet which is 192.168.31.0/24
192.168.31.0/24 . A route needs to be created for this subnet. Gateway IP address must be in the
same subnet as the DC LAN VIP as shown below.
Following are the high-level configuration steps to configure Branch site for Inline deployment:
1. Create a new Branch site.
2. Populate Interface Groups based on connected Ethernet interfaces.
3. Create Virtual IP address for each virtual interface.
4. Populate WAN links based on physical rate and not burst speeds using Internet and MPLS Links.
5. Populate Routes if there are additional subnets in the LAN infrastructure.
1. Navigate to Conf igurat ion Edit or Conf igurat ion Edit or - > Sit es Sit es, and click the "+ " Add + " Add button.
2. Populate the fields as shown below.
3. Keep default settings unless instructed to change.