Citrix NetScaler EE, Руководство по установке и настройке

Страница: 637 / 1026

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.637 https://docs.citrix.com
screen shot displays sample values used in this documentation. Enter values as follows:
XenServer IP Address— (Item M4 on your worksheet, or H4 if this is the second appliance in an HA pair.) The
management address of the built-in XenServer hypervisor. This must be a valid address on the management network.
Management Service IP Address— (Item M5 on your worksheet, or H5 if this is the second appliance in an HA pair).
The address of the Management Service VM that you use to perform most system management tasks. This must be
a valid address on the management network.
Netmask— (Item M3 on your worksheet). The subnet mask of the management network.
Gateway— (Item M2 on your worksheet). The default gateway for the management network.
DNS Server— The IP address of the DNS server. This is a mandatory parameter.
NTP Server— IP or FQDN address of your time server. This will be used by all the virtual machines in the appliance.
Note that if you use advanced CIFS or MAPI acceleration, the system time of the appliance must be close to that of
the Windows domain server, so choose an NTP server that maintains a close relationship to the time on your
Windows domain server.
Note: Unless the NTP server is specified as an IP address, it is not used by the accelerator.
Time Zone— Select your time zone from the pull-down menu.
Change Password— Select this check box and type in a new nsroot password, two times, to change the password.
This same password is used on the management service and the NetScaler instance for account nsroot, and on the
accelerator for the admin account. If the password is not changed, it remains set to nsroot (the default).
Figure 1. Sample Values for the Fields in Management Access Settings Page of the Configuration
4. Check your settings and click Continue.
5. In the Manage Licenses section, see if an appropriate license is already listed in the Name field. If so, select it and skip to
step 8.
6. Click Upload in the Update Licenses section.
7. Navigate to the folder that contains the license file and open the file.
8. Click Add License and upload the license file provided by Citrix. The license is added to the appliance, as shown in the
following figure.
Figure 2. Sample License Added to the Appliance on the Manage License Files Page of the Configuration Wizard
You can also get a license file from the Citrix.com website by clicking the here link and using your My Citrix credentials.
9. Select the license in the Name field and click Continue. The SD-WAN Setup page appears. Fill in the fields as follows:
1. Network Settings— This section informs the accelerators of the management network.
SD-WAN Accelerator IP Address— Enter the value of M6 from your worksheet. This is the IP address of the
accelerator
NetScaler IP Address— Enter the value of M7 from your worksheet. This is the IP address of the NetScaler GUI.
Use System Netmask and Gateway— Select this option if you want to use the network mask and gateway IP
addresses you had specified in the Platform Configuration page.
Netmask— Enter the value of M3 from your worksheet. This is the subnet mask (netmask) of the management
network (note that you have entered this already, on a previous page).
Gateway— Enter the value of M2 from your worksheet again.
Signaling IP Address— Enter the value of T4 from your worksheet. This is the external signaling IP address of the
accelerator, used by SD-WAN Plug-ins to connect to the appliance.