Citrix NetScaler EE, Руководство по установке и настройке

Страница: 133 / 1026

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.133 https://docs.citrix.com
4. Select the Et hernet Int erf aces Et hernet Int erf aces to include.
Under Et hernet Int erf aces Et hernet Int erf aces, click a box to include/exclude that interface. You can select any number of interfaces
to include in the group. A goldenrod highlight indicates an included interface.
5. Select the Bypass Mode Bypass Mode and Securit y Securit y level from the drop-down menus.
The Bypass Mode Bypass Mode specifies the behavior of bridge-paired interfaces in the Virtual Interface Group, in the event of an
appliance or service failure or restart. The options are: Fail-t o-Wire Fail-t o-Wire or Fail-t o-Block Fail-t o-Block.
6. Select the Securit y Level Securit y Level from the drop-down menu..
This specifies the security level for the network segment of the Virtual Interface Group. The options are: Trust ed Trust ed or
Unt rust ed Unt rust ed. Trusted segments are generally protected by a firewall (default is Trusted).
7. Click ++ at the left edge of the new blank entry.
This reveals the Virt ual Int erf aces Virt ual Int erf aces and Bridge Pairs Bridge Pairs fields.