Citrix NetScaler EE, Руководство по установке и настройке

Страница: 426 / 1026

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.426 https://docs.citrix.com
through step 14.
8. A
Redirecting to new management IP
message appears.
9. Click OK OK .
10. Unplug your computer from the Ethernet port and connect the port to your management network.
11. Reset the IP address of your computer to its previous setting.
12. From a computer on the management network, log on to the appliance by entering the new Management Service IP
address, such as
https://<Managemnt_IP_Address>
, in a web browser.
13. To continue the configuration, accept the certificate and continue. The option to continue varies according to the web
browser you are using.
14. Log on to the appliance by using the nsroot nsroot user name and the password from your worksheet.
15. The Configuration wizard starts again. In this wizard, some of the values which you have already provided, appear by
default. Specify rest of the values you have recorded in your worksheet.
16. If you want to manage the appliance through Command Center, specify the Command Center IP address, port, and
registration password in the Command Cent er Conf igurat ion Command Cent er Conf igurat ion page. Otherwise, skip this step.
17. In System Services section, update the values if necessary.
18. In the Licensing Licensing section, select the appropriate license type. You can either select a local license or a remote license
server to apply a license to the appliance.
1. If you opt for a local license, you must generate a license by using the host ID of the appliance. To generate a local
license for the appliance, see http://support.citrix.com/article/ctx131110. To apply the license, you can navigate to the
NetScaler SD-WAN appliance; Conf igurat ion
Conf igurat ion > Appliance Set t ings Appliance Set t ings > Licensing Licensing page, after completing the
Configuration wizard.
2. If you opt for a remote licensing server, you must select a remote appliance model and provide the IP address of the
licensing server in the Licensing Server Address Licensing Server Address field.
19. In the WAN Link Definition section, specify receive and send speeds for the WAN link in the respective fields. Citrix
recommends values 10% lower than the WAN bandwidth, to avoid network congestion.
20. By default, WAN-side adapter settings are configured on the appliance. Accept the default settings.
21. Click Inst all Inst all. After the Installation process is complete, the appliance restarts.
22. As soon as the appliance restarts, the Dashboard page appears.
23. To configure the appliance to accelerate the network traffic, open navigate to the Conf igurat ion Conf igurat ion tab.
Note: Make sure that you have already applied the appropriate license to the appliance.
24. On the Net work Adapt ers Net work Adapt ers page of the Appliance Settings node, verify and, if necessary, assign IP addresses, subnet
masks, and gateways to the accelerated bridges (apA and apB) to be used. Applying these changes restarts the
appliance.
Note: You need to assign IP addresses to apA and apB adapters only if you intended to configure WCCP mode, virtual
inline mode, or the Video Caching feature on the appliance.
25. The Initial Configuration is complete. Traffic now flows through the appliance. The Dashboard page shows this traffic.
26. You need additional configuration on the appliance if you intend to use some of the modes and features, such as WCCP
mode, virtual inline mode, video caching, secure peering, high availability, encrypted CIFS/MAPI acceleration, AppFlow
monitoring, or SNMP monitoring.
Note:
Inline installations place the appliance between your LAN and WAN routers, using both ports of the accelerated bridge,
such as ports LAN1 and WAN1 on a SD-WAN 1000 appliance with Window Server or ports 1/1 and 1/2 on SD-WAN 2000