Citrix NetScaler EE, Руководство по установке и настройке

Страница: 328 / 1026

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.328 https://docs.citrix.com
4. Expand BGP BGP
→
Basic Set t ings Basic Set t ings
→
Neighbors Neighbors and click the Add (+ ) Add (+ ) icon.
Note
If there is only one Routing Domain configured, the Routing Domain column will not appear. If Identity is not checked for a specific
Virtual IP Address (see the Virtual IP Address Identity section for more details), the associated Virtual Interface will not be available for
IP services.
5. For Sites with multiple Routing Domains, choose a
Ro uting Do ma in Ro uting Do ma in from the drop-down.
The Routing Domain determines which Virtual Interfaces are available.
6. Choose a Virt ual Int erf ace Virt ual Int erf ace from the drop-down menu. The Virtual Interface will determine the Source IP Address.
7. Enter the IP Address IP Address of the IBGP Neighbor router in the Neighbor IP field.
8. In the
Ho ld T ime (s ) Ho ld T ime (s ) field, enter the Hold Time, in seconds, to wait before declaring a neighbor down (the default is 180).
9. In the
Lo ca l Preference (s ) Lo ca l Preference (s ) field, enter the Local Preference value, in seconds, which is used for selection from multiple BGP routes (the default is
100).
10. Click the
IG P Metric IG P Metric checkbox to enable the comparison of internal distances to calculate the best route.
11. Click the
Multi Ho p Multi Ho p checkbox to enable multiple hops for the route.
12. In the
Pa s s w o rd Pa s s w o rd field, enter a password for MD5 authentication of BGP sessions (authentication is not required).
Note
Configuring Route Reflectors and Confederations for iBGP is not supported in a NetScaler SD-WAN network.