Citizen CT-P29 Series, Справочник по командам

Страница: 288 / 428

- 287 -
fn=7: Function 7 Copying User-defined Page
GS ( E pL pH fn a d1 d2
[Code] <1D>H<28>H<45>H<pL><pH><fn><a><d1><d2>
[Range] (pL+pH×256)=4 (pL=4, pH=0)
fn=7
a=10, 12, 17
[Outline] [The specification which is common to the model]
• Copies the data of user-defined code page in the font specified by “a”.
• Configuration of customized value No.
d1 d2 Function
31 30 Loads the character code page data specified by “a” in storage area to work area.
30 31
Saves the character code page data in work area to the storage area of the font
specified by “a”.
• Work area: Area where data is initialized by power OFF or resetting (initialize).
Operation is made in accordance with the data set in this area.
• Storage area: Area where data is not initialized by power OFF or resetting (initialize).
• User-defined code page: Page 255 (ESC t 255)
• This function operates only in printer function setting mode.
[The specification which depend on the model]
CT-S300 / CT-S310 / CT-S801 / CT-S851 / CT-S601 / CT-S651 / CT-P29x series
a
Font Type
10
Font B: 9 (horizontal)×17 (vertical)
12
Font A: 12 (horizontal)×24 (vertical)
17
Font C: 8 (horizontal)×16 (vertical)
CT-S280 / CT-S281 / CT-S2000 / CT-S4000 / CT-S310II /
CT-S801II / CT-S851II / CT-S601II / CT-S651II / CT-S251
a
Font Type
10
Font B: 9 (horizontal)×24 (vertical)
12
Font A: 12 (horizontal)×24 (vertical)
17
Font C: 8 (horizontal)×16 (vertical)