Citizen CT-P29 Series, Справочник по командам

Страница: 199 / 428

- 198 -
CT-S2000
• Setting MSW 4 (a=4) (Black mark/Label model)
n b (Set Value) Function
1
48 (Default)
At the selection of Black mark/Label paper, enables auto
end-measurement.
49
At the selection of Black mark/Label paper, disables auto
end-measurement.
2
48 (Default) Finding top of form at power ON disabled.
49 Finding top of form at power ON enabled.
3
48 Feed & Cut at TOF disabled.
49 (Default) Feed & Cut at TOF enabled.
4
48 (Default) Uses thermal roll paper.
49 Uses Black mark paper/ label paper.
5
48 (Default) Detects paper position and black mark.
49 Detects paper position and inter-label distance.
6
48 (Default) Paper type selection disabled
49 Paper type selection enabled
7 48 (Default)
Reserved
8
48 Cut method is determined according to the cut command.
49 (Default)
Partial cut is performed regardless of cut command. (full
but by command: enabled).
* MSW 4-5 is valid only if black mark/label is set. If MSW4-4 is set for
thermal paper, it is invalid
* MSW4-8 is invalid when black mark/label is selected. Cut type for black
mark/label paper is only full cut.
• Setting MSW 5 (a=5)
n b (Set Value) Function
1
48 (Default) Buzzer sound enabled.
49 Buzzer sound disabled.
2
48 (Default) Basic calculation pitch (180 dpi / 360 dpi).
49 Basic calculation pitch (203 dpi / 406 dpi).
3
48 USB mode virtual serial.
49 (Default) USB mode printer class.
4 48 (Default) Reserved
5 48 (Default) Reserved
6
48 (Default) High quality printing mode disabled
49 High quality printing mode enabled
7 48 (Default) Reserved
8 48 (Default) Reserved