Citizen CT-P29 Series, Справочник по командам

Страница: 212 / 428

- 211 -
[Outline] [The specification which is common to the model]
• Sets the customized value set in “a” to (nL+nH×256).
a Function
1 Specifies user NV memory capacity.
2 Specifies the memory capacity of NV graphics.
3
Selects paper width.
5
Selects printing density.
6
Selects printing speed.
97 Sets the number of divisions for conducting head
116
Selects printing color.
138 Control of bezel LED
151 Select Security / Connect Device
155 Search of BT device
156 Auto reconnection request
190
Selects the Error LED states for Bluetooth status
201
Sets ACK output position (only parallel I/F).
202
Selects input buffer full Busy output/cancel timing (idle capacity).
212 Selects DMA (Direct Memory Access) control of serial communication.
213 Selects the flow control when virtual COM is set.
214 Select the enable/disable of Kanji.
216 Selects JIS / Shift JIS or Kanji Code
217 Selects the international character set
218 Selects the code page
220 Sets BM width.
221 Sets BM page length.
222 Adjusts the BM sensor and distance between header.
223 Adjusts the distance of BM footer.
224 Adjusts the distance of BM header.
225
Adjusts the BM width and the extreme breath of the distance between
label.
226 Sets the wait time for manual cut
227 Sets the maximum length measurement distance.
228 Sets the after an auto cut movement.
229 Sets the manual cut position movement.
230 Selects the language of LCD message
231 Selects the enable/disable of LCD download message
232 Selects the LCD auto Off time
233 Selects the enable/disable of key lock
234 Selects the direction of LCD message
235 Sets the distance between labels.
236 Sets the label length.
237 Sets the label sensor and distance between header.
238 Adjusts the distance of the label footer.
239 Adjusts the distance of the label header.
240 Sets the buzzer volume
241 Sets the max dot number for one head division
242 Sets the max dot number for Powered USB
243 Select the mechanism type
244 Select the top margin
245 Select the line gap reduction rate
246 Select the vertical/horizontal character size reduction percentage
247 Selects the number of dot for vertical shift
248 Selects the event to activate buzzer
249 Selects the emulation for old dot impact printer
251 Selects the liner free mode setting