Citizen CT-P29 Series, Справочник по командам

Страница: 188 / 428

- 187 -
fn=3: Function 3 Setting Memory Switch Value
GS ( E pL pH fn [a1 b18...b11] ... [ak bk8...bk1]
[Code] <1D>H<28>H<45>H<pL><pH><fn> [<a1><b18>…<b11>] … [<ak><bk8>…<bk1>]
[Range]
10≤(pL+pH×256)≤65535
fn=3
b=48, 49, 50
CT-S280
a=1, 2, 3
CT-S300
a=1, 2, 3, 4
CT-S281
a = 1, 2, 3, 4, 5, 13
CT-S310 / CT-S2000 / CT-S4000 / CT-P29x series
a = 1, 2, 3, 4, 5
CT-S801(II) / CT-S851(II) / CT-S601(II) / CT-S651(II) / CT-S310II / CT-S251
a=1, 2, 3, 4, 5, 6
[Outline] [The specification which is common to the model]
• Changes the MSW set in a to the value set in “b”.
B Function
48
Sets corresponding bit to OFF.
49
Sets corresponding bit to ON.
50
Does not change corresponding bit.
[Caution] [The specification which depend on the model]
CT-S281 / CT-S310 / CT-S2000 / CT-S4000 /
CT-P29x series
/
CT-S801 / CT-S851 / CT-S601 / CT-S601 / CT-S310II
• MSW7 to MSW10 cannot be changed by this command. They can be changed by the
setting of customize value.
CT-S801II / CT-S851II / CT-S601II / CT-S651II
• MSW7 to MSW10,13 cannot be changed by this command. They can be changed by the
setting of customize value.
CT-S251
• MSW7 to MSW10,11,13 cannot be changed by this command. They can be changed by
the setting of customize value.