Citizen CT-P29 Series, Справочник по командам

Страница: 146 / 428

- 145 -
CT-S801II / CT-S851II / CT-S601II / CT-S651II / CT-S251
fn Code
Function
No.
Function
0, 48 GS ( L pL pH m fn Function48
Sends NV graphics memory
capacity.
2, 50 GS ( L pL pH m fn Function50
Prints graphics data stored in print
buffer.
3, 51 GS ( L pL pH m fn Function51
Sends the remaining amount of NV
graphics memory.
4
、
52 GS ( L pL pH m fn Function52
Sends the remaining amount of
download graphics memory
64 GS ( L pL pH m fn d1 d2 Function64
Sends key code list of defined NV
graphics.
65 GS ( L pL pH m fn d1 d2 d3 Function65
Erases all data of NV graphics in a
lump.
66 GS ( L pL pH m fn kc1 kc2 Function66
Erases the specified NV graphics data.
67
GS ( L pL pH m fn a kc1 kc2 b xL xH
yL yH [c d1…dk] 1… [c d1…dk] b
Function67
Defines raster graphics data to NV
memory.
69 GS ( L pL pH m fn kc1 kc2 x y Function69 Prints the specified NV graphics.
80 GS ( L pL pH m fn d1 d2 Function80
Sends key code List of defined
Download Graphics.
81 GS ( L pL pH m fn d1 d2 d3 Function81
Erases all Data of Download Graphics
in a Lump.
82 GS ( L pL pH m fn kc1 kc2 Function82
Erases specified Download Graphics
Data.
85 GS ( L pL pH m fn kc1 kc2 x y Function85
Prints the specified Download
Graphics Data.
112
GS ( L pL pH m fn a bx by c xL xH yL
yH d1…dk
Function 112 Stores raster graphics data to print
buffer.
• pL, pH specifies the number of bytes or “m” and later to (pL+pH×256).
[Caution] [The specification which is common to the model]
• Frequent use of this command may result in damage of NV memory. Use the Write command to
NV memory in consideration of [10 times max./day] .
• Following the processing of this command, printer Busy may occur during writing data in NV memory. While
the printer is Busy, it stops receiving process. Therefore, data transmission (including real-time command)
from host is prohibited.