Citizen CT-P29 Series, Справочник по командам

Страница: 191 / 428

- 190 -
CT-S281
• Setting MSW 4 (a=4)
n b (Set Value) Function
1
48 (Default)
At the selection of Black mark/Label paper, enables auto
end-measurement.
49
At the selection of Black mark/Label paper, disables auto
end-measurement.
2
48 (Default) Finding top of form at power ON disabled.
49 Finding top of form at power ON enabled.
3
48 (Default) Feed & Cut at TOF disabled.
49 Feed & Cut at TOF enabled.
4
48 (Default) Uses thermal roll paper.
49 Uses Black mark paper/ label paper.
5
48 (Default) Detects paper position and black mark.
49 Detects paper position and inter-label distance.
6
48 (Default) Paper type selection disabled
49 Paper type selection enabled
7
48 (Default)
Label mode 1 - Auto paper type selection disabled
49 Label mode 2 – Auto paper type selection enabled
8
48 Cut method is determined according to the cut command.
49 (Default)
Partial cut is performed regardless of cut command. (full
but by command: enabled).
*** Default setting of MSW4-4 depends on the model. Thermal paper is the
default of the standard model.
*** MSW 4-5 is valid only when black mark/label is set. If MSW4-4 is set for
thermal paper, it is invalid
*** MSW4-8 is invalid when black mark/label is selected. Cut type for black
mark/label paper is only full cut.
• Setting MSW 5 (a=5)
n b (Set Value) Function
1 49 (Default) Reserved
2 48 (Default) Reserved
3
48 USB mode virtual serial.
49 (Default) USB mode printer class.
4 48 (Default) Reserved
5 48 (Default) Reserved
6 48 (Default) Reserved
7
48 (Default) If PNE is released, Error LED is automatically turned off.
49 Error LED is not turned off until the paper is exchanged
(printer Cover is opened) even if PNE is released.
8 48 (Default) Reserved
• Setting MSW 13 (a=13) (CT-S281BD model only
）
n b (Set Value) Function
1
48(Default) Bluetooth security level “Low”
49 Bluetooth security level set by MSW13-2
2
48(Default) Bluetooth security level “Middle”
49 Bluetooth security level “High”
3
48(Default) Accept connection request from all devices
49 Accept connection request from paired device only
4 48(Default) Reserved
5
48 Respond against Bluetooth device scan
49(Default) Does not respond against Bluetooth device scan
6 48 Disable auto reconnection request function
49(Default) Enable auto reconnection request function
7 48(Default) Reserved
8 48(Default) Reserved