Citizen CT-P29 Series, Справочник по командам

Страница: 328 / 428

- 327 -
GS I n
Support model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251
CT-S281 CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310 II
[Function] Sending the printer ID
[Code] <1D>H<49>H<n>
[Range]
CT-S280
1≤n≤3, 49≤n≤51, 65≤n≤67, n=69, 112
CT-S281 / CT-S300 / CT-S310 / CT-S2000 / CT-S4000 / CT-S801(II) / CT-S851(II) /
CT-S601(II) / CT-S651(II) / CT-P29x series / CT-S310II / CT-S251
1≤n≤4, 49≤n≤52, 65≤n≤67, n=69, 112
CT-S281
• Only Bluetooth model
90
≦
n
≦
92
、
n
＝
94
、
99
CT-S801II / CT-S851II / CT-S601II / CT-S651II / CT-S251
• Only Bluetooth I/F
90
≦
n
≦
92
、
n
＝
94
、
99
、
101
≦
n
≦
106
[Outline] [The specification which is common to the model]
• Sends the specified printer ID.
[Caution] [The specification which is common to the model]
• Under DTR/DSR control, the printer sends the printer ID after verifying that the host is ready to
receive.
• If the host is not ready to receive, the printer waits for the host to become ready to receive.
• Under XON/XOFF control, the printer sends the printer ID without checking whether or not the host is ready
to receive.
• Because this command is executed when data is mapped in the receive buffer, there may be a delay
between command receiving and printer ID sending depending on the condition of the receive buffer.
• If ASB (Automatic Status Back) is enabled by GS a, the host must discriminate between the printer ID due to
this command and the status due to ASB.
[The specification which depend on the model]
CT-S281 / CT-S300 / CT-S310 / CT-S2000 / CT-S4000 /
CT-S801(II) / CT-S851(II) / CT-S601(II) / CT-S651(II)
• Sending the Black mark length is valid only when Black mark paper is selected.