Citizen CT-P29 Series, Справочник по командам

Страница: 239 / 428

- 238 -
CT-S601(II) / CT-S651(II)
• a=116: Sets the paper specified by (nL+nH×256).
(nL+nH×256) Paper
1(Default) Specified single color paper.
257 Recommended 2-color paper5
• a
＝
151: Sets the Bluetooth Security/Connect Device specified
・
by (nL+nH×256). [CT-S601II, CT-S651II]
(nL+nH×256) Security / Connect Device
1(Default) Low / All
2 Middle / All
3 Middle / Paired
4 High / All
5 High / Paired
• a
＝
155: Sets the Bluetooth device scan specified by (nL+nH×256).
[CT-S601II, CT-S651II]
(nL+nH×256) BT Device Scan
1 No Response
2(Default) Discoverable
• a
＝
156: Sets the Bluetooth Auto Reconnect request specified
by (nL+nH×256). [CT-S601II, CT-S651II]
(nL+nH×256) Auto Reconnect
1 Invalid
2(Default) Valid
• a=201: Outputs ACK to the position specified by (nL+nH×256).
(nL+nH×256) ACK Output Position
1(Default) ACK-in-Busy
2 ACK-while-Busy
3 ACK-after-Busy
• a=202: Controls input buffer full Busy with the value selected by
(nL+nH×256) and controls Busy with output/cancel timing
(remaining capacity).
(nL+nH×256)
When Input Buffer
Capacity “Small” is Set
When Input Buffer
Capacity 4K Bytes
(Large) is Set
Output Cancel Output Cancel
1 16 26 128 256
2 16 40 128 512
3 30 50 72 256
4 30 60 72 512
• XON/XOFF is also output by the establishment of conditions.
• Ignores the data received when input buffer idle capacity is 0.
• a=212: Selects DMA (Direct Memory Access) control of serial
communication specified by (nL+nH×256).
(nL+nH×256) DMA control
1 Invalid
2(Default) Valid